Stair rail install part 3 metal balusters



installing the metal balusters

oak railing wit metal baluster

Oak rail with Metal Balusters

We do have a you tube video on how to install metal balusters on this site. Once you have the stair railings in it’s pretty much done. I will quickly summarize.  I had drilled the rails prior to installing between the newel posts. I loosen one of the newel posts so it will move far enough to install the railing past the rail bolt. About 2 1/2 inches will usually do. Connect the rail using a rail bolt wrench. Get the rail level and even before getting it tight. With the rail in, its time to drill the bottom holes. I use a laser to transfer the location to the floor. You can also set the rail to the floor and transfer the marks with a square. If you needed to cut the rail longer or shorter because of a  wall out of plumb, make sure to index the rail on a newel before marking.

I cut the metal balusters with a Milwaukee brand portable band saw. I have used angle grinders with cutoff wheels. Second option can be done but take extreme care. Hot metal sparks are dangerous on skin, eyes and clothing. Nothing like feeling a little warm, then discover the cause being your cotton shirt is flaming. Leather is recommended. Fire suppression equipment maybe in order. My advise now is spring for the bandsaw. Rental shops carry them for cheap.

Once again I digress.

Metal balusters come with one end rounded at the very tip. I cut that 1 inch off but leaving enough to see which end was round so you can orientate it to the top when we install. This is helpful to keep all pieces symmetrical as we put them in. You don’t want baskets or any piece with a pattern to be at different elevations with each other.



We use PC7 epoxy. It’s black to match the iron balusters. Cleans off easily with a damp rag. Watch our you tube video on the procedure.





One thought on “Stair rail install part 3 metal balusters

  1. Antonio

    Well this was quite insightful. Thanks for making the video, it was helpful. Great for DIY-ers like my wife and I, we are working on installing a small stair case rail right now.


Leave a Reply

Your email address will not be published.

Please Do the Math